the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

300a alternator?


Post ReplyPost New Topic
< Prev Topic Next Topic >
twobig86 
Copper - Posts: 84
Copper spacespace
Joined: November 30, 2005
Posted: September 24, 2008 at 3:13 PM / IP Logged  

Does running my new 300 Amp alternator harder on the engine than say a stock 70 amp one?  Some people I know are saying that it is going to take around 5 hp just to run it...im kind of confused about all this...

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: September 24, 2008 at 3:20 PM / IP Logged  
It takes power to make power, so yes, a larger alternator can place a larger load on your engine.  300a @ 14.4VDC = 4320 watts, which is equivalent to about 5.8 Hp.  It will lower your gas mileage too (of course the worst gas mileage destroyer in car stereo can be the added weight of large subwoofer systems.)
Support the12volt.com
twobig86 
Copper - Posts: 84
Copper spacespace
Joined: November 30, 2005
Posted: September 24, 2008 at 4:59 PM / IP Logged  
So what about if its at idle say 100 amps?  Would it be using roughly 2 hp or would it always be using the 5.8 hp...
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: September 24, 2008 at 5:04 PM / IP Logged  

The power required by anything electrical, including alternators or amplifiers or anything else, is determined by the load  So yes, if it's producing 100 amps it needs a lot less power input than if it's producing 300 amps.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer