the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 buick lesabre


Post ReplyPost New Topic
< Prev Topic Next Topic >
blackpearl 
Member - Posts: 2
Member spacespace
Joined: November 12, 2008
Location: Wisconsin, United States
Posted: November 12, 2008 at 9:22 PM / IP Logged  

Hello, just joined this forum and was wondering can help me out. 

I just put my old system, in sig, into my new car and ran into a few problems with clearance for the cd deck/ mess of wires. 

I`m looking for a way to run 2 sets of rca cables and a remote wire from behind the deck and into the trunk. As for the floor I just pulled back the panel and the carpet, stuff the power wire under them and replaced. As for the rca's they are just hanging through the front underneath the deck... :/  It blows, looks like ass, but I needed to get to work and wanted it installed. Sounds excellent, definately need to get speakers for the front, though. RATTLES...a little.    Anyone else work on this car and give some tips or any general advice? 

!996 Buick Lesabre
Eclipse cd7200
12" Memphis M3, Ported
Memphis PR1000d
RF Power 6x9's
Eclipse XA2000
blackpearl 
Member - Posts: 2
Member spacespace
Joined: November 12, 2008
Location: Wisconsin, United States
Posted: November 14, 2008 at 10:01 AM / IP Logged  
Bump no one else working on Buicks?
!996 Buick Lesabre
Eclipse cd7200
12" Memphis M3, Ported
Memphis PR1000d
RF Power 6x9's
Eclipse XA2000

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, June 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer