the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Hifonics Amp Owners, Bass Remote Cable?


Post ReplyPost New Topic
< Prev Topic Next Topic >
punkdcrew11 
Member - Posts: 2
Member spacespace
Joined: April 30, 2007
Location: United States
Posted: December 02, 2008 at 10:29 AM / IP Logged  

My bass remote cable got ripped out of my amp. I bought some new 8pin plugs for it but i dont know the order of the wires.

So im asking if a few hifonics amp owners can look at the plug end of the bass remote cable and give me the color order.

from left to right. clip on back side.

Hifonics Amp Owners, Bass Remote Cable? -- posted image.

looks like the colors are- yellow blue black teal clear pink purple light blue. not in any order.

Thanx

O and if it matters i have a 1606 bxi

thunda_hawg 
Member - Posts: 46
Member spacespace
Joined: December 21, 2007
Location: Georgia, United States
Posted: December 02, 2008 at 3:34 PM / IP Logged  
id re-run the whole cable. i think you can use an 8 pin telephone jack cable for that control pretty cheaply.  try radio shack  . id also look at the controller for a specific order, that may help.
89' 240sx
Rockford t8004
boston z6 comp.
eclipse 3432
polk MM 8"
Taylor owes Joe a Sandwich
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 02, 2008 at 6:34 PM / IP Logged  

Every bass knob or strapping cable I have seen are wired unlike a phone cable.  Following are the difference between the phone type cable and a strapping cable for a Planet Audio or Power Acoustic class d amplifier.  I have not checked a Hifonics bass knob cable yet.  I would find out before you attempt to make a new cable.  I just do not want you to go and buy a phone cable, it may or may not be catastrophic to the amp. I have heard of people burning amps up by using a phone cable.

Hifonics Amp Owners, Bass Remote Cable? -- posted image.

Hifonics Amp Owners, Bass Remote Cable? -- posted image.

audiocableguy 
Copper - Posts: 630
Copper spacespace
Joined: January 27, 2003
Location: Idaho, United States
Posted: December 02, 2008 at 9:37 PM / IP Logged  
Saw a guy a few days ago fry a EPX2 by using a
phone cable between the controller and the brain.
Turns out he needed a bridge cable.
He's paying for it now!
Know for sure, don't guess!
bigjohnny 
Copper - Posts: 293
Copper spacespace
Joined: September 23, 2008
Location: Ontario, Canada
Posted: December 02, 2008 at 9:46 PM / IP Logged  
looks like a crossover cat5e cable for networking..... you would think there is some kind of standard, why would the company go and alter an already existing cable type?
im speaking out my ass however, i have no idea how they work, hell ive never even seen one before. im just throwing out a guess based on the diagram above.
looks like the poster is describing a crossover cable.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: December 03, 2008 at 5:20 AM / IP Logged  
A Crossover cable for CAT5 has only two of the 8 connections crossed over. Do not try a crossover cable on it either.
Bottom of this page is a picture of the cable
If you have the ability to snag the picture, snag-it or windows vista snipping tool, you may be able to zoom in on it and see the colors of the second end of the cable.
thunda_hawg 
Member - Posts: 46
Member spacespace
Joined: December 21, 2007
Location: Georgia, United States
Posted: December 04, 2008 at 3:43 PM / IP Logged  
ive used 5 and 8 pin conductor telecable/ cat5a  without any issues with the hifonics amps . i deal with alot of broken bass control knobs for those particular amps and havent had any issues or comebacks about them. if you look at it they're not bridged they just dont have a pin to the conductor it just supports a an 8pin conductor. but try everything else out i suppose.
89' 240sx
Rockford t8004
boston z6 comp.
eclipse 3432
polk MM 8"
Taylor owes Joe a Sandwich
thunda_hawg 
Member - Posts: 46
Member spacespace
Joined: December 21, 2007
Location: Georgia, United States
Posted: December 04, 2008 at 3:54 PM / IP Logged  

okay so i looked at a hifonics 1606 here at the store . i remember using a modular telejack line to combine the controls of three amps in to one control knob using the BT-120-8 (ul listing i think) modular jack wire without any issue, given you are using the knobs with the jack on rear side of its case .also the colors you indicated match the colors on this cable as well but that may be coincidence.

89' 240sx
Rockford t8004
boston z6 comp.
eclipse 3432
polk MM 8"
Taylor owes Joe a Sandwich

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer