the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

double din in a 2001 suburban


Post ReplyPost New Topic
< Prev Topic Next Topic >
CutDog504 
Silver - Posts: 643
Silver spacespace
Joined: May 14, 2002
Location: Louisiana, United States
Posted: January 24, 2009 at 2:38 PM / IP Logged  
I'm trying to squeeze a double din radio into the dash of an 01 suburban originally equipped with a 1 1/2 din factory radio. 03 and newer have double dins in the dash. Has anyone ever converted the dash in one of these trucksto double din? If so, any tips?
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: January 24, 2009 at 3:26 PM / IP Logged  
If your good with glass you can cut it out to fit. I had a buddy that did his that way and looked great. Not sure there would be any other way but to do a custom piece.
double din in a 2001 suburban -- posted image.
jrod83 
Copper - Posts: 81
Copper spacespace
Joined: October 29, 2007
Location: Texas, United States
Posted: January 24, 2009 at 5:01 PM / IP Logged  
go to a junk yard and get a new style dash bezel along with the back part and youll be able to do it with little cutting and no fab work...
MECP Certified
I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!
SAW 'EM OFF!
CutDog504 
Silver - Posts: 643
Silver spacespace
Joined: May 14, 2002
Location: Louisiana, United States
Posted: January 24, 2009 at 5:26 PM / IP Logged  
Thats what I was pretty much thinking, to try and get some 03 or newer dash parts from the junkyard.
forbidden 
Platinum - Posts: 5,353
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: November 01, 2003
Location: Alberta, Canada
Posted: January 25, 2009 at 12:14 AM / IP Logged  

Take your dash bezel off and cut the divider out from between the radio opening and the heater control opening. Next you will need to cut away at the dash section of the vehicle. The top area above the factory radio needs to get cut away to provide enough clearance for the new double din unit. Finally take a standard fit kit for this vehicle and cut the top off of it. ISO mount the double din unit to the kit, snap the kit into the proper place and you should be good to go.

Top Secret, I can tell you but then my wife will kill me.
soundnsecurity 
Gold - Posts: 2,711
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 10, 2008
Location: Louisiana, United States
Posted: January 25, 2009 at 11:48 AM / IP Logged  
it can be done

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer