wire dual voice coil sub

how do i wire my ten inch aw1006t audiobahn dual voice coil sub to my sony explode 1200 watt channel amp. so it is bridged.? in 2 ohms or greater. ive never had to wire a sub that has 4 connections on it and im lost.

and would a dual ported box sound good with this sub? i found one on ebay

Two voice coils, each one is 4 ohms.  Each one has two inputs, mainly so that in rare situations someone might want to insert PHAT wires into every one of them for that PHAT WIRY look.  But only one + and - on each coil needs to be used...using both is called "parallel wiring" and changes impedance factor.

So use just one input at each coil.  Here's a page from crutchfield.com  They show you the manufacturer's ported box requirements on that page.  A dual ported box would have to have ports the same diameter but twice as long as what you see on that page, and therefore a larger overall box size.  Keep it one port and as close to the 1.4 cu ft per sub spec as possible.  Best thing to do is have somebody build a box for you.

thanks alot i appreciate the information. it was very helpful. any sugestions for a box?