wiring subs

Home / the12volt's Install Bay / Car Audio / wiring subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cordlaw

Member - Posts: 2

Joined: March 03, 2010

Location: Georgia, United States

Posted: March 03, 2010 at 12:46 AM / IP Logged

need help asap.................i have a set of legency model 1249 12'' subwoofers. Specs are as follows, power(watts peak) 1200,Nom.impedance (ohm) 4,voice coil 2.5 ksv,magnet structure 2x90 oz, Fs (hz) 23.2, Qms 4.92, Qes 0.84, Qts 0.72 Spl (db)85, Vas (cuft) 4.908

And i was wondering how should I wire these woofers. If anyones no how to do it r if they no a website with pics where i could get this is info I would be greatful. and also i have a california profile 1200 amplifier could anyone let me no if these woofers and amp make a good combo

anonymous1

Copper - Posts: 151

Joined: October 25, 2009

Location: Washington, United States

Posted: March 03, 2010 at 1:54 AM / IP Logged

Just to be clear, you have the 2x12" but they are not currently in any enclosure, and you have the amp but it is not running anything yet.

You intend to run only the subs off the amp when installed. You intend to mount the subs in an enclosure.

Is this correct?

And if it is known that the subs are a match for the x-over choices on the amp and the amp pwr at 4ohm is compatible, you want to know how to wire up the pwr and speakers?

cordlaw

Member - Posts: 2

Joined: March 03, 2010

Location: Georgia, United States

Posted: March 03, 2010 at 11:48 PM / IP Logged

No the woofers are'nt In a enclosure yet but I do have one . I haven't put them In yet cause don't no how to wire them up cause they are DVC. Yes I intend to run just the subs off of this amp. Dont no how many ohms the amp is. tried to google it but it pulled up a newer model. The model It pulled it had 3 fuses mine has 4.

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: March 04, 2010 at 8:39 AM / IP Logged

https://www.the12volt.com/caraudio/woofer_configurations.asp

Specs: From Manual...

Output Power @ 4 Ohm------- 2 x 600W

RMS Power @ 4 Ohm---------- 2 x 300W

RMS Power @ 2 Ohm---------- 2 x 450W

Bridged RMS @ 4 Ohm-------- 1 x 900W

http://www.legacycaraudio.com/manuals/LW1049-1249-1549.pdf... 600 Watts RMS...

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.