the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

jl w3


Post ReplyPost New Topic
< Prev Topic Next Topic >
gsr-teg23 
Member - Posts: 2
Member spacespace
Joined: August 18, 2010
Location: Washington, United States
Posted: August 18, 2010 at 2:06 AM / IP Logged  

so here is the deal i just bought two new jl w3v3 2 ohm and im not sure how to tune my amp for them i have a jl 500 1 and my old speakers wich were older w3 dual voice coil sounded great but i pushed them to hard and they finaly gave out so i got these ones and they pop when i turn them up and they dont seem that loud what can i do to fix this and how should i tune my amp?? please help

       ps in a sealed box.

drive fast and play it loud!
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 18, 2010 at 4:10 AM / IP Logged  
play only one woofer at a time.  Does the level of bass increase with just one speaker connected? That amp is not capable of driving a 1 ohm load.  Do you have the speakers wired in series?
gsr-teg23 
Member - Posts: 2
Member spacespace
Joined: August 18, 2010
Location: Washington, United States
Posted: August 18, 2010 at 12:55 PM / IP Logged  

ok i will try that thank you

drive fast and play it loud!
icearrow6 
Copper - Posts: 497
Copper spacespace
Joined: February 02, 2009
Location: California, United States
Posted: August 18, 2010 at 1:30 PM / IP Logged  
i may be wrong, but isn't the V3 W3 rated at 300W? The V2 was rated at 400W. i could be wrong.
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: August 18, 2010 at 2:15 PM / IP Logged  
He has 2 woofers.  I am not totally familiar with the line, but I do know that they make more than one size speaker with that labeling.   So I can not even tell if he has 8s 10s 12s or 13.5s.
icearrow6 
Copper - Posts: 497
Copper spacespace
Joined: February 02, 2009
Location: California, United States
Posted: August 18, 2010 at 6:12 PM / IP Logged  
you are right, i don't know why i just assumed they were 12". LOL.
So yeah need more info from this guy to figure it all out.
The phase of the woofers is the most likely cause though. . .

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer