How To Use Room EQ Wizard with Sony XAV-AV100?

Home / the12volt's Install Bay / Car Audio / How To Use Room EQ Wizard with Sony XAV-AV100?

Welcome Guest :)

Members

< Prev Topic Next Topic >

jimbanville

Member - Posts: 18

Joined: September 23, 2018

Location: Georgia, United States

Posted: October 01, 2018 at 12:35 PM / IP Logged

I use the free program room EQ wizard and a calibrated usb umik-1 microphone with my MS surface pro to calibrate the audio on my home theater systems. I use a displayport to hdmi connector to my av receivers to get the audio test tone sweeps into the system and out of the speakers. How would I connect this MS surface pro to my Sony XAV-av100? It only has a usb input. It also has Bluetooth. No aux inputs. I just need for the car speakers to play the sweep as accurately as possible . The mic and laptop tracks and graphs the result. Thanks!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.