Wireing My Amp and subs

Home / the12volt's Install Bay / Car Audio / Wireing My Amp and subs (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

victor_26086

Member - Posts: 1

Joined: March 10, 2004

Location: United States

Posted: March 10, 2004 at 11:36 PM / IP Logged

i have a 4000 watt mobil authority amp and 2 12" solobaric kikkers L7 the speakers can be 2 or 4 OHms how and amp is

1 Typical Current Draw At IDLE: 1.4Amps 4 Ohms: 2 x 400W 2 Ohms: 2 x 700W 1 Ohms: 2 x 1200W 0.5 Ohms: 2 x 2000W Mono: 1 x 4000W

and the woofers:

Impedance........2 Ohms

Max Recommended Amplifier Power ..........1500 watts peak

Max Recommended Amplifier Power ...........750 watts RMS

QUESTION: how should i wire this?

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: March 11, 2004 at 1:35 AM / IP Logged

If this is a 2 channel amp rated to run down to half ohm than just wire everything in parrell and bridge the amp. So you just connect all the positives off all the subs to one channel and all the negatives off all the subs to the other channel. According to your spec you should be getting about 700 watts rms per sub.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wireing My Amp and subs

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.