need help with box

Home / the12volt's Install Bay / Car Audio / need help with box (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Creative Snds

Member - Posts: 4

Joined: March 15, 2004

Location: United States

Posted: May 01, 2004 at 7:41 PM / IP Logged

I have 2 premier spl 2000 subwoofers .The spec sheet said to put them in 1.75cubic feet a piece with a 4inch by 6.5 inch long port but when i ran the specs thru bassbox the box was total different has any one had any sucess with a box for these woofers. I plan on competeing but need max spl with agood sound for daily listening.they are the12inch version and will have 8oowatts apiece thanks

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 01, 2004 at 10:40 PM / IP Logged

Bassbox will never produce the same numbers as factory recomendations. Always start with factory recs. Here's a very nice review of this woofer: http://www.caraudiomag.com/testreports/0309cae_pioneer/

They are rated to handle 750 watts RMS, by the way, and the test above produced 122 db in a vented enclosure built to factory specs.

Support the12volt.com

Creative Snds

Member - Posts: 4

Joined: March 15, 2004

Location: United States

Posted: May 02, 2004 at 6:23 AM / IP Logged

thanks for the info don't want to waste time building boxes

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help with box

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.