Kenwood (KDC 722) Head unit

Home / the12volt's Install Bay / Car Audio / Kenwood (KDC 722) Head unit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Breedy

Member - Posts: 1

Joined: May 02, 2004

Location: Canada

Posted: May 24, 2004 at 7:14 PM / IP Logged

Hello everyone,

Got this head unit, as above got all the wiring from the 12Volt's database for an 93 honda civic, and made the appropriate connections.

The radio works mechanically, displays, and does all the functions as per the manual, but unfortunately I cannot get any sound out of it. "YES" I DO HAVE THE SPEAKERS WIRED PROPERLY. Someone had mention there might be an Pre-amp somewhere in the car; not to my knowledge though, I took the original Honda radio out of the car.

Anyone can shed some light on this would appreciate this, or E_MAIL @ woo1@sympatico.ca

WITH THANKS

WAYNE.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 24, 2004 at 9:53 PM / IP Logged

Hey Wayne, was this a new head unit ? Sounds like the speaker output's on the unit are burned out.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: May 25, 2004 at 10:22 AM / IP Logged

You could possibly have a speaker grounding out also. The new HU go into protection mode if you have a grounded out speaker. Disconnect all of your speakers, turn your HU on and connect them one at a time once the HU shuts off, you've found the bad speaker, or if you have a DMM, test each speaker for grounding.

Do it right the first time

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood (KDC 722) Head unit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.