question for Steven Kephart

Home / the12volt's Install Bay / Car Audio / question for Steven Kephart (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

97Avalonxls

Copper - Posts: 115

Joined: November 17, 2004

Location: United States

Posted: January 26, 2005 at 12:09 PM / IP Logged

I am looking into getting a Brahma 12. I think I'll probobly be putting it into a sealed enclosure. My question is what is the best way to wire it. I have two Directed 600d's (the 1999 version) they are externally syncable. what is the best way to wire the sub? Externally bridged with the VC's in parallel, one amp on each VC? any other suggestion are certainly welcome but I think I'd rather not buy a new amp. thanks in advance

Steven Kephart

Platinum - Posts: 1,737

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: November 06, 2003

Location: Oregon, United States

Posted: January 26, 2005 at 5:28 PM / IP Logged

I'm not to familiar with the Directed amplifiers. However I really don't recommend strapping amplifiers unless you really know what you are doing as there is huge potential for mishap. Because of this, I would recommend just using one amp on the Brahma. You might be surprised at the output you will have. In fact adding twice the power (similar to hooking up that second amp) doesn't give you as much gain as you would expect. Good luck!

Steven Kephart

Adire Audio

Steven Kephart

Platinum - Posts: 1,737

Joined: November 06, 2003

Location: Oregon, United States

Posted: January 26, 2005 at 5:32 PM / IP Logged

BTW, you can contact me directly in the future by e-mail at skephart@adireaudio.com. This will also allow me to forward your question to our tech support who are a little better at answering these questions than I am. Also, this would have been a great question to ask to the general public as I'm sure many here have more experience with that amp than I do.

Steven Kephart

Adire Audio

97Avalonxls

Copper - Posts: 115

Joined: November 17, 2004

Location: United States

Posted: January 27, 2005 at 9:43 AM / IP Logged

excellent, thank you very much for the feedback, and in the future I will certainly make use of the email address. Thanks again

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

question for Steven Kephart

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.