the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Diameter of magnet on new JL 10W3v2


Post ReplyPost New Topic
< Prev Topic Next Topic >
03sdccfx4 
Member - Posts: 24
Member spacespace
Joined: April 07, 2005
Location: United States
Posted: April 10, 2005 at 10:51 PM / IP Logged  

I need to know the diameter of the magnet on the new JL 10W3v2, I am designing my box before I purchase them.

Thanks

'03 F-250 CC Fx4
joebobcletusjr 
Copper - Posts: 72
Copper spacespace
Joined: January 21, 2005
Location: United States
Posted: April 11, 2005 at 4:17 PM / IP Logged  

I think for this one you should go to JL Audio's website and get the theile small parameters and that will give you the total air displacement of the sub so you can figure that into your box design, unless you are looking for something entirely different like mounting depth, but then again the theile small should tell you that too.

In my opinion, the theile small parameters should be all that you need to give your sub the room that it needs to live.

eh? what did you just say?
03sdccfx4 
Member - Posts: 24
Member spacespace
Joined: April 07, 2005
Location: United States
Posted: April 11, 2005 at 7:14 PM / IP Logged  
It has everything but the magnet diameter, I know the airspace and the speaker depth.  I need the magnet diameter, because the box is a wedge and I need the magnet to clear the back of the box.
'03 F-250 CC Fx4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer