the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amplifier and rear control unit


Post ReplyPost New Topic
< Prev Topic Next Topic >
sooners78 
Member - Posts: 5
Member spacespace
Joined: May 07, 2005
Location: United States
Posted: May 09, 2005 at 3:22 PM / IP Logged  
I'm new to this installation stuff, so I have a few questions. I have a 2003 Taurus with a Rear Control Unit in the trunk. I am putting a four channel amp in the trunk to power 4 speakers, 2 front and 2 rear. I want to keep my factory head unit. I will not be getting a sub. The amp is a Sony Xplod 500 Watt with speaker level inputs.
Can I make my input and output connections through the RCU? If so, can I use a harness to do this? If the power is 50W X 4, can I just use my factory speaker wire. I would like to keep this as simple as possible. Thanks for any help you can give me.
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: May 09, 2005 at 7:39 PM / IP Logged  

The rear control unit you are refering to is the tuner, and amp sections of the factory head unit (if i understand you correctly) 

You will have to use the wires from there for any of your wiring.  The speaker outputs of the factory amp will be your new amp inputs.  And yes, you can use the factory wires for your speaker outputs, especally if you plan on amplifying the factory speakers.  You may want to think about running new wires if you plan on upgrading your speakers (though you may not need to depending on power output of the new amp). 

With the new amp it will be louder, but you will still have the problem of disapearing bass at higher volume.  Thats what you will have to live with until you get a new head unit.

sooners78 
Member - Posts: 5
Member spacespace
Joined: May 07, 2005
Location: United States
Posted: May 09, 2005 at 10:06 PM / IP Logged  
Thanks for the reply. I am upgrading all four of my speakers. The amp is only 50 watts per channel. Am I correct in assuming that my factory speaker wires will be able to handle this?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer