the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

kicker comp vr 15s


Post ReplyPost New Topic
< Prev Topic Next Topic >
hearseman85 
Member - Posts: 2
Member spacespace
Joined: August 09, 2005
Location: United States
Posted: August 09, 2005 at 3:56 AM / IP Logged  
I have a 89 cadillac hears fwd style hearse and 2 2005 cvr 15's and a hifonics bx1500d amp *1500rms@1ohm) with a 2 far cap and optima yellow top. what kind of box should i use. I like all diff music but mainly do rap. I wanna be able to make your chest hurt. and shake the shhh of of ya along with the car next to me. I plan on getting 2 more 15 cvr's and another hifonics if i'm not happy. I wanna try comps to and wanna bad ass score. so what am i lookin at. i can send a pic of the back of the car if needed
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: August 09, 2005 at 5:10 AM / IP Logged  

If you want a bad ass score, search for the best box builder and install shop you can find and pay them to custom-install your gear.  But if you want to work it all out yourself, be prepared for a long learning process to get to the point where you can produce a box that will give you what you want.

Your comps are dual voice coil subs, so you have to know whether they are DVC 2 ohm or 4 ohm so you will know how to connect them to the amp.  Look at the Kicker manual here.  Scroll down to the vented enclosure specs under the heading "SPL, Deep Bass".  That's what you want.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
hearseman85 
Member - Posts: 2
Member spacespace
Joined: August 09, 2005
Location: United States
Posted: August 09, 2005 at 5:14 AM / IP Logged  
I know there dual 4 ohm. I had them in a generic prefab box. right now there wired 1 ohm so i'm overpowering them "some". I wanna know if it's possible to get that damn that made my chest hurt out of these.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, July 7, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer