re 8's

Home / the12volt's Install Bay / Car Audio / re 8's (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

peterp77

Member - Posts: 2

Joined: September 25, 2003

Location: United States

Posted: August 24, 2005 at 4:02 PM / IP Logged

need some help wiring 3 RE 8 , they are 2 ohms each , the amps that I have for use is as follows Soundstream Refrence 300 (old style) Rockford Fosgate P3001 mono ,and a Punch 250.1 my ? is what is the best way to wire up these speakers and what amp to use Thanks

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: August 25, 2005 at 12:32 AM / IP Logged

Your RE 8's are dual 4 ohm, aren't they? http://www.reaudio.com/html/

Here's your wiring diagram: https://www.the12volt.com/caraudio/woofer_configurations.asp?Q=3&I=42

Use a mono amp. The load would be too low to bridge across a two channel amp.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

peterp77

Member - Posts: 2

Joined: September 25, 2003

Location: United States

Posted: August 25, 2005 at 4:34 PM / IP Logged

No they are DVC with one set of + and - terminals and it's 2 ohm per speaker they are Re 8 's on the website it says DVC 4 ohms but when I checked them on my ohmmeter they read 2ohms thanks for the reply

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

re 8's

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.