Profile California 3300 3ch Amp

Home / the12volt's Install Bay / Car Audio / Profile California 3300 3ch Amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rockinrav4

Member - Posts: 3

Joined: September 27, 2005

Location: United States

Posted: September 27, 2005 at 4:39 PM / IP Logged

I have 2 amps (1) a Profile California 3300 3 Channel, 300watt Peak amp, (2) a Jensen A222HX 2 Channel 100 W per channel.

I have 1 Orion Cobalt 12" SVC Subwoofer that came in a Dual Ported enclosure already.

My question is this, Can the 3 Channel be bridged into the 1 subwoofer. (Giving me 300watts peak) or am I better off with the Jensen that can be bridged to 250 Watts max with a 125 watt RMS.

The book for the 3 ch gives output power of 75wX2+150W with RMS of 37WX2+75W and MONO CH RMS Power of 75W.

Any suggestions which is gonna give me the most power and best sound?

Thanks

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: September 27, 2005 at 5:03 PM / IP Logged

No, you cannot combine the three channels of the Profile amp into one woofer. Ignore the "peak" power ratings on those, they will be lucky to attain the RMS ratings. And if you really want a suggestion as to "best sound," dump both amps. Sorry, but those two brands are really low-end and while it may be acceptable for you, they are not brands I can recommend.

Support the12volt.com

Blowntweeters

Silver - Posts: 650

Joined: June 03, 2005

Location: Nevada, United States

Posted: September 27, 2005 at 5:38 PM / IP Logged

i agree with DYohn .both of those amps are of very poor quality. i would suggest a small mono block amp. take a look at www.ikesound.com look at the alpine and kicker amps. no more than 500watts RMS you should only need 300watts RMS good luck

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

rockinrav4

Member - Posts: 3

Joined: September 27, 2005

Location: United States

Posted: September 27, 2005 at 8:00 PM / IP Logged

OK I know they are lousy amps. But out of the 2 which is better. BTW the subwoofer is 400watt, RMS is 200 Watts. Can I get the 3 channel bridged to 150W or is max 75W RMS. I know the Jensen can do 125w RMS bridged 4 ohms.

dwarren

Platinum - Nominee - Posts: 1,811

Joined: December 03, 2004

Location: California, United States

Posted: September 27, 2005 at 8:14 PM / IP Logged

DYohn wrote:

No, you cannot combine the three channels of the Profile amp into one woofer.

Use the Jensen, it makes the most sense.

rockinrav4

Member - Posts: 3

Joined: September 27, 2005

Location: United States

Posted: September 29, 2005 at 8:43 AM / IP Logged

Any suggestions on a good amp with rms of apx 200w. Sub is rated 400w peak and 200w rms. I also have 2 10" MTX's (1) 1 in a ported Jensen Tube and 1 not used so maybe a 200w (rms) per channel 2 channel amp.

Any recommendations

Blowntweeters

Silver - Posts: 650

Joined: June 03, 2005

Location: Nevada, United States

Posted: September 29, 2005 at 12:01 PM / IP Logged

i think you should build or buy a slot ported box .for the 2 10" MTX's and get a decent amp. what are those MTX's RMS rated power handling ?

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Profile California 3300 3ch Amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.