91' maxima diagram

Home / the12volt's Install Bay / Car Audio / 91' maxima diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

CjbM

Member - Posts: 1

Joined: May 09, 2002

Location: United States

Posted: May 09, 2002 at 9:23 AM / IP Logged

Does anyone have a audio wireing diagram for a 91' maxima?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 09, 2002 at 9:32 AM / IP Logged

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1990-91&make=Nissan&model=Maxima&ID=18541&type=Stereo

If you need anything else, just post 91' maxima diagram -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

reygarcia

Member - Posts: 6

Joined: March 03, 2003

Location: United States

Posted: March 03, 2003 at 3:14 PM / IP Logged

Where does the illumination wire on the harness hook up to? I have the dimmer hooked up, but nowhere to hook up the illumination.

Rey

esmith69

Gold - Posts: 1,511

Joined: November 26, 2002

Location: United States

Posted: March 03, 2003 at 7:17 PM / IP Logged

According to the wiring diagram, your vehicle should have an illumination wire, but not a dimmer wire. You sure you got the right wires? Just FYI it is very common for a vehicle to not have both dimmer and illumination wires. Similarly, many times you'll have a car that has at least one of these wires, but the aftermarket radio you're installing doesn't have either one of the wires. In this case, simply tape off the unused wire.

reygarcia

Member - Posts: 6

Joined: March 03, 2003

Location: United States

Posted: March 03, 2003 at 7:32 PM / IP Logged

With everything hooked up right, my dash does not illuminate properly. I have checked all the fuses and made sure that nothing is wrong. What could cause this. I saw somewhere on the internet that the illumination wire gets hooked up to a 12V source. Is this correct and which 12V source (12V constant or 12V power)?

Rey

reygarcia

Member - Posts: 6

Joined: March 03, 2003

Location: United States

Posted: March 04, 2003 at 10:54 AM / IP Logged

I found out why my illumation on my front dash wasn't working. It turned out to be the Timing Control Unit. Went to junkyard, pulled the TCU out of a Nissan Stanza and it works.

Rey

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91' maxima diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.