F150 2005 Radio Pinout

Home / the12volt's Install Bay / Car Audio / F150 2005 Radio Pinout (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jwells

Member - Posts: 1

Joined: January 18, 2006

Posted: January 18, 2006 at 5:58 PM / IP Logged

I've made a harness for adding a hands free bluetooth device that attaches between the radio and wire harness. Everything works fine except the volume and scan buttons on the steering wheel no longer work. Not all of the pins had leads on the adaptor plug I used. I assume there are at least two wires that are used for these buttons but I don't see it on any diagrams. Does anyone know which pins on the radio are for this?

h2oskierfl

Copper - Posts: 87

Joined: April 20, 2005

Location: United States

Posted: January 28, 2006 at 11:39 AM / IP Logged

more than likely it is a single wire. you will need to meter them and find one that changes resistance when the buttons are pushed. that is the wire.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

F150 2005 Radio Pinout

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.