1999 Mazda Protege, new HU

Home / the12volt's Install Bay / Car Audio / 1999 Mazda Protege, new HU (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: August 24, 2006 at 3:16 PM / IP Logged

Trying to install a new HU in a 99 Protege. The store didn't have any wiring harnesses so I decided to hardwire it. I can't seem to get it to power on. Tell me if this is right for power.

red to pink w/black for acc

yellow to blue w/red for ignition

Already checked the fuse in the fuse box. I did notice that the pink w/black runs to a plug above the fuse box along with another pink wire and the blue w/red, so I'm guessing that the car has two ACC wires. Not sure if that makes a different as far as the radio goes though.

buddholly

Copper - Posts: 244

Joined: August 24, 2006

Location: United States

Posted: August 24, 2006 at 3:29 PM / IP Logged

Sorry, that's what I meant.

Yellow is connected to Blue/Red.

I have no Blue/Black.

I have pink/black, GREEN/ black and yellow.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Mazda Protege, new HU

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.