2003 Dodge Ram Remote turn on wire

Home / the12volt's Install Bay / Car Audio / 2003 Dodge Ram Remote turn on wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

204013033

Member - Posts: 1

Joined: October 06, 2006

Location: United States

Posted: October 06, 2006 at 11:02 PM / IP Logged

Hello, Looking to install a few amps in my 2003 Dodge Ram. I was needing to know which wire to use for my remote turn on. I will be using the factory radio and just adding the amps. Thanks

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: October 06, 2006 at 11:50 PM / IP Logged

Just use a switched accessory wire. It'll read 12 volts with the meter when the key is in the accessory position. This wire should be green at the ignition harness.

My ex once told me I have a perfect face for radio.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Dodge Ram Remote turn on wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.