speaker problems

hey there people,

i am having a bit of a problem in my 89 jeep yj, with my speakers, sometime when i am going over a bumb, even on pavement, my speakers are cutting out but my subs are still going and playing the beat of the music, now i checked the wiring of the speakers and they appear to be okay.. i was just looking for a little input from member if they have got any ideas of what the problem might be, i do have a panosonic head unit and the speakers are clarion 4x6's..thanks

scott

Stop going over bumbs in your jeep yj.

Couldn't resist the smart reply....  Bumbs suck.  Sometimes it amounts to a broken connection on the source unit, a hairline crack that breaks the ground contact with chassis.  It's hard to see a lot of the time, so once you've positively found that all wiring connections are secure with no stray wires, etc., look carefully at the connections to the amp.

   I would assume that the speakers are connected to the radio.  There is a good chance your problem is a bad connection inside your radio.  Easiest way to find out is to remove your radio, tap on it simulating your vehicle hitting a bump.  If it cuts out chances are it is a bad solder joint inside your radio. 

Let me know what happens