Installing audio in Honda CRX 1988

Home / the12volt's Install Bay / Car Audio / Installing audio in Honda CRX 1988 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

maggca

Member - Posts: 2

Joined: February 03, 2003

Location: Canada

Posted: February 03, 2003 at 3:20 PM / IP Logged

I was istalling new audio in my Honda. Constant power wire is showing 12 volts, Ignition wire is showing 0 V all the time, even with the key turned in the ignition. Radio do not power. Ignition wire should show 12V after key was turned?? I check the fuse, is OK.

Please reply

esmith69

Gold - Posts: 1,511

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 26, 2002

Location: United States

Posted: February 04, 2003 at 9:43 AM / IP Logged

either a fuse is blown or you have the wrong wires--use this guide to make sure you're using the right wires: https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1988-91&make=Honda&model=Civic&ID=17967&type=Stereo

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing audio in Honda CRX 1988

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.