Bazooka RSW1024DVC Ask?

Home / the12volt's Install Bay / Car Audio / Bazooka RSW1024DVC Ask? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Sebastian018

Silver - Posts: 364

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 01, 2002

Location: United States

Posted: February 05, 2003 at 9:09 AM / IP Logged

HI, I have two Bazookas RSW1024DVC DVC in a bandpass box and Two bazookas ELW1014 Single in Two Tubes. the two ELW1014 are connected to One amplifier two channels 600W, they work great and my question Is having a Profile California two channels 600W, Can I just wire one coil of the sub and leave the another coil of the sub alone, Or I will sound better is I connect it Parallel Wired connecting the plus terminal of the Bazooka DVC connected to the plus terminal of the other terminal, same with the negative..

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: February 06, 2003 at 5:37 PM / IP Logged

Are you sawing you only want to run 1 voice coil on each DVC sub? If so its not possible well actualy it is. But if you do that you will destroy the sub in a matter of a few days. on a DVC you must run both coils.

Sebastian018

Silver - Posts: 364

Joined: November 01, 2002

Location: United States

Posted: February 06, 2003 at 6:06 PM / IP Logged

OK, And how do I run Both Coils?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: February 06, 2003 at 7:53 PM / IP Logged

Just read my post sorry about the spelling errors. What are the ohms on your subs and what’s the lowest independence (ohms) your amp can handle.

Sebastian018

Silver - Posts: 364

Joined: November 01, 2002

Location: United States

Posted: February 06, 2003 at 7:56 PM / IP Logged

I was checking my amp and you can connect it 2ohms Stable Stereo and its two channel, the Bazookas DVC are 4 ohn I could connect parallel Positive of One terminal to positive of the other terminal then one to the positive amp same with the negative so I will have 2Ohm stable right?

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: February 06, 2003 at 8:12 PM / IP Logged

Correct if you wire them in parallel that will give you a 2 ohm load on each channel of the amp.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bazooka RSW1024DVC Ask?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.