Posted: May 25, 2002 at 11:54 AM / IP Logged
Posted: May 26, 2002 at 6:08 PM / IP Logged
Posted: May 26, 2002 at 11:22 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Sunday, November 30, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Sunday, November 30, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




I have a 1F Capacitor and the manufacturer (Road Rage) does not list what value the fuse should be,is that because it depends on the amps used ?,i was wandering if just the subwoofer should get the cap boost or share it with my midwoofers as well,the sub amp will delliver 100 W x1 and the midwoofer 50 W x2,now what my confusion is how many amps should i use for the cap alone,ofcourse there will be a main fuse in line for the whole system.
Regarding fuses;my components conssist of 4 amps,one requires 40 A and the other three need 30 A and one unit at 3 A (crossover) plus the capacitor mentioned above,what value should my main fuse should be coming from the battery,i thought a 70~80 A would do,'m i wrong ?
