the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

extra rca cable lenth or cheapo


Post ReplyPost New Topic
< Prev Topic Next Topic >
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 15, 2007 at 9:34 PM / IP Logged  

A while ago I was expanding the positve pin on my RCAs with a small flathead to make them fit in the amp a bit tighter. When I did, one side broke off. It still works, but I want to replace them. -I notice alt whine goes away when I wiggle them around in the amp (??), this is why i'm replacing them. BTW, I will open the amp up to check the RCA input jacks if when I replace the interconnect the noise is still there when wiggling around.

Anyways, i've got some RF cables but they are 20' long, I only need 6'. Should I use them (they'd be coiled up somewhere to hide the slack) or should I just replace them with some cheapo 6'ers?

Here they are; http://www.rockfordfosgate.com/products/product_details.asp?cat_id=5&series_id=36&family_id=47&item_id=62500&locale=en_US&p_status=discontinued

I know what you're gonna say (use cheapos), but i'd like to have the good ones for my front stage 'cause i've got 'em.

Will having them coiled up somewhere, to hide the slack, add noise or anything?

-Thanks, fellow SQ seekers.

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: November 16, 2007 at 5:18 AM / IP Logged  
The noise is going to still be there.   You have a bad solder joint on the shield connection inside the amp.  Unless it is only getting the noise with the damaged RCA plug. 
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 17, 2007 at 2:59 PM / IP Logged  

i am an idiot wrote:
The noise is going to still be there.   You have a bad solder joint on the shield connection inside the amp.  Unless it is only getting the noise with the damaged RCA plug. 

I will open it up sometime this week as i'm on 'vacation' and will have plenty of time. Thanks.

Plus, I think my alt is going out, too. I've got a 95a max system plus an extra yellowtop pulling off of my factory 105a alt (Big3, BTW) so it was just a matter of time! -Good thing I uninstalled my cRapacitor! Just more money that needs (yep, a need , alt whine SUCKS!) to be spent. Yey! -sarcasm

I surely will try the shield connection thing first. -Precciate it!

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 17, 2007 at 3:16 PM / IP Logged  
Oh, in that case couldn't I ground out the RCA negatives to see if that is the problem? Cause I did (first instinct!) and the noise got worse.
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001
jmelton86 
Gold - Posts: 1,228
Gold spacespace
Joined: February 07, 2007
Location: South Carolina, United States
Posted: November 22, 2007 at 2:02 PM / IP Logged  

Alright, i am an idiot, I took your advice (always great advice, BTWextra rca cable lenth or cheapo -- posted image.) and desoldered my RCA negatives from the amps board, then resoldered (they were tight in the first place, I just wanted to make sure) them in. The noise is still here. All power and ground as well as RCA and speaker connections are better than good.

I'm guessing my alternator is going out. WEEE! Great fun! -J/K. It's too bad I already sold my old cRapacitor -I was going to hook it up to see if it would suppress the noise. It did on TCSS's Ferrari, and it was suggested that its alternator was going out.

Is there anything I can do to see if it's my alternator? I really hate alt whine!

Happy Thanksgiving, everyone!

2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer