Fortin Bypasses/Interfaces Updates 3/11

Hyundai & Kia Data Key Bypass with EVO-ALL & EVO-CAN. EVO-ALL & EVO-CAN now comes preloaded with immobilizer key bypass (and more) on most 2006-2012 Hyundai & Kia models:

• 2006-2012 Hyundai
• 2006-2012 Kia
• Regular key and Push-to-start Proximity key supported.

Now preloaded on hardware version 3 of EVO-ALL & EVO-CAN. Hardware version 3 required and now shipping. Hardware version 2 not supported.

• The EVO's powerful processor cracks and clones any existing vehicle key. A valid key is only required during programming.
• No scan tool required.
• No special download required.
• No internet connection required.
• No registration or login required.
• No key required.
• Foot-brake control on Push-to-start vehicles. No relay required.
• Reservation mode available with manual transmission vehicles.
• Real-time Tachometer output via dual-CAN architecture.

2011 Dodge Journey Push-to-Start. (Exclusive) Now preloaded on EVO-ALL firmware version 3.00 & EVO-CHR firmware version 2.07:

• Immobilizer bypass, lock, unlock, arm, disarm, tachometer status, door status, hatch status, hatch release, hood status, hand-brake status and foot-brake status.
• Manual and automatic transmission.
• Key take-over: After entering the vehicle - push and release the push-to-start button twice.

EVO-ALL & EVO-CAN simplified on Buick, Chevrolet & GMC.

• Buick LaCrosse 2010-2011
• Buick Regal 2011
• Chevrolet Camaro 2010-2011
• Chevrolet Cruze 2011
• Chevrolet Equinox 2010-2011
• GMC Terrain 2010-2011
• Simplified Installation.
• Only 9 connections required for complete key bypass, remote-starter and key-less entry installation. All connections are at the ignition column.
• No additional parts required with EVO-ALL. One relay and one resistor required with EVO-CAN.
• Easy self-learning 3 step programming procedure:
  • Press and hold the programming button.
  • Plug in 3 connectors.
  • Turn key on/off twice. Programming Complete.
• Unlimited programming attempts. Any original flip-key / blade-key is cloned so the module can be reprogrammed multiple times without filling up the vehicles limited key memory.

2011 Ford Fiesta Push-to-start. (Exclusive)

• Automatic and Manual transmission.
• Push-to-start button control including lock, unlock, arm, disarm, tachometer, door status, hatch status, hatch release, hood status, hand-brake status and foot-brake status.

EVO-ALL Nissan & Infiniti Push-To-Start.

• Infiniti QX56 2011
• Infiniti M37 2011
• Infiniti M56 2011
• Nissan Altima 2007-2011
• Nissan Cube 2011
• Nissan Juke 2011
• Nissan Maxima 2007-2011
• Nissan Quest 2011
• Automatic Push-to-start takeover: After entering the vehicle with the Intelligent-Key and closing the driver door the EVO-ALL will automatically turn the ignition ON. This allows the vehicle to put in to gear and driven without the need to press the Push-to-start button twice.
• Auto Light Shutdown: When idle mode or pit stop mode is activated the EVO-ALL will automatically simulate the door opening to turn OFF the vehicle's auto-lights.
• Manual Transmissions: The EVO-ALL automatically controls the vehicle's push-to-start button on all Nissan and Infiniti.
• Compatible will all remote-starter brands with hard-wired (non data-link) connections.

EVO-ALL Nissan & Infiniti Intelligent-Key Knob.

• Infiniti QX56 2008-2010
• Nissan Armada 2008-2010
• Nissan Maxima 2007-2011
• Nissan Murano 2005-2007
• Nissan Pathfinder 2009-2011
• Nissan Rogue 2008-2011
• Nissan Sentra 2007-2011
• Nissan Versa 2007-2011
• Automatic key take-over: After entering the vehicle with the Intelligent-Key the EVO-ALL will automatically unlock the turn-knob so the vehicle can be put in to gear and driven without having to shut-down and restart the vehicle.
• No relay required: The EVO-ALL controls the turn-knob with its internal relay.

2011 Subaru with TB-SUBARU2. (Exclusive)

• Subaru Forester 2011
• Subaru Legacy 2011
• Subaru Outback 2011
• Subaru Tribeca 2011
• Dealer scan tool required for programming.
• Can be connected directly to TB-CONTROL, EVO-CAN or EVO-ALL.
• Use with TB-CONTROL for only immobilizer bypass.
• Use with EVO-CAN or EVO-ALL to include control for all convenience features through CAN.

the12volt • Support the12volt.com

Good news, good jobs !

Good! This will simplified my life for a long time ..... Thank you guys!