multiple relays

Home / the12volt's Install Bay / Car Security and Convenience / multiple relays (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

lochlin

Member - Posts: 8

Joined: December 23, 2007

Location: Alberta, Canada

Posted: January 18, 2008 at 11:50 PM / IP Logged

Is it ok and will it work to trigger 2 relays at the same time off of one 200ma (-) output.Thanks for any replies.

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: January 19, 2008 at 12:30 AM / IP Logged

yes even 3

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

lochlin

Member - Posts: 8

Joined: December 23, 2007

Location: Alberta, Canada

Posted: January 19, 2008 at 12:45 AM / IP Logged

Perfect,thank you for the quick reply...

brcidd

Copper - Posts: 274

Joined: January 07, 2005

Location: Ohio, United States

Posted: January 19, 2008 at 10:19 AM / IP Logged

Sure it is okay-- but if you are sharing the neg out trigger with some bypass modules or even certain relays- don't be surprised if the car does start the next morning due to a dead battery---I always diode isolate the neg out trigger when sharing it-- the relays or modules can "find" a ground through each other- and be active and pull enough amperage to discharge your car battery- I had it happen on a new install once-- and never again-- Always diode isolate- or use relays with diodes built in..........

Brcidd - Engineer That Does Remote Starter Installs on the side.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

multiple relays

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.