561r settings

Home / the12volt's Install Bay / Car Security and Convenience / 561r settings (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

clamshack

Member - Posts: 2

Joined: April 16, 2008

Posted: April 16, 2008 at 11:19 PM / IP Logged

97 jeep grand cherokee with a valet model 561r.

I want to keep the starter from locking the car. I turned off the Ignition lock feature and that kept it from locking after I manually started the car with the key. The car still locks itself when started with the remote and then you insert the key turn it and press the brake. How can I keep the starter from ever locking the car? While still keeping the lock/unlock feature of the remote functional. Thanks for help on this one.

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: April 17, 2008 at 6:35 AM / IP Logged

Locks after starting with the remote?

That sounds like something that would have been done on purpose during installation, rather than a programming issue.

Who installed it, and what special module (if any) was used for the doorlocks?

clamshack

Member - Posts: 2

Joined: April 16, 2008

Posted: April 17, 2008 at 8:05 AM / IP Logged

I had it installed by the shop I bought the starter from. it doesn't lock immediately when you start the vehicle with the remote, but when you turn the key and press the brake to drive it locks itself. there was no extra module needed to lock/unlock the car. I want to disable the self locking feature.

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: April 17, 2008 at 5:09 PM / IP Logged

So what you're saying is when you put the car into gear it locks? Or it locks if you open the door and turn the ignition on with the key?

First case is a factory Jeep feature and you'd have to check your owner's manual to see if there's any way to disable it.

Second case - you may not have programmed it correctly. Ignition controlled lock and ignition controlled unlock are totally separate.

Lock I think is program option 13 or 18, depending on how old your 561R is.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Search for other posts by chriswallace187

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

561r settings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.