the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 isuzu rodeo, scytek galaxy 5000rs


Post ReplyPost New Topic
< Prev Topic Next Topic >
doogi0122 
Member - Posts: 44
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: November 27, 2008 at 10:04 AM / IP Logged  

hello all

i have a stupid question

i am installing a scytek galaxy remote start alarm on my 00 rodeo and have been trying to figure out the lock system it has a factory keyless system

the specs ive downloaded say negitive triggers on lock and unlock

now my question is do i need to have relays hooked to the alarm

or do i just hook up the wires? i know i need to hook up a relay for my domelight supervision but the locks have me a bit confused thanx in advance

doogi
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: November 27, 2008 at 10:53 AM / IP Logged  
you dont need relays, unless of course your unit does not have negative lock and unlock outputs. if it doesnt, then you need relays so you can change the polarity
doogi0122 
Member - Posts: 44
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: November 27, 2008 at 6:24 PM / IP Logged  
thanx
doogi
doogi0122 
Member - Posts: 44
Member spacespace
Joined: February 01, 2006
Location: United States
Posted: December 11, 2008 at 6:04 AM / IP Logged  

hello all

i have a slight delemma i am in the middle of a install on my personal 00 rodeo with a factory anti-theft/keyless entry . my first problem is that when i remote start it turns on the radio but not my blower. i got the scytek galaxy 5000rs  the system has a 2nd ignition wire listed as a brown wire and my rodeo also has a 2nd ignition does that have any effect on  my blower? my second problem is with the locks the wires that control them are not where they say does the keyless module have anything to do with this? or are there any other parts because of my factory anti-theft? cant seem to find anything about the factory anti theft . any help is greatly appriciated

thanks

doogi
f29966 
Member - Posts: 36
Member spacespace
Joined: June 13, 2009
Location: Louisiana, United States
Posted: June 16, 2009 at 10:12 AM / IP Logged  
i just got the scytek 5000rs installed in my car , but every time i start the car , the door will auto lock , i want to disable the auto lock , please help me to program it , thanks ..

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer