
self start keyless entry, 07 tundra
Welcome Guest :)
ks audio
Member -
Posts: 25
Joined: December 09, 2008
Location: Utah, United States
Posted: December 09, 2008 at 10:17 PM / IP Logged
I need the wire colors and what they go to for a 07 Toy Tundra 4 door for self start and key less entry thanks KS AUDIO
ksaudio
ckeeler
Gold -
Posts: 1,461
Joined: June 20, 2008
Location: New Mexico, United States
Posted: December 09, 2008 at 10:23 PM / IP Logged
12 VOLT CONSTANT | WHITE (+) | IGNITION SWITCH HARNESS | |
STARTER | DARK GREEEN (+) | IGNITION SWITCH HARNESS | |
STARTER 2 | N/A | N/A | |
IGNITION 1 | LIGHT GREEN (+) | IGNITION SWITCH HARNESS | |
IGNITION 2 | BLACK (+) | IGNITION SWITCH HARNESS | |
IGNITION 3 | N/A | N/A | |
ACCESSORY /HEATER BLOWER 1 | GRAY (+) | IGNITION SWITCH HARNESS | |
ACCESSORY /HEATER BLOWER 2 | N/A | N/A | |
KEYSENSE | N/A | N/A | |
PARKING LIGHTS ( - ) | ORANGE (-) (REQUIRES RELAY) | AT IGNITION SWITCH | |
PARKING LIGHTS ( + ) | GREEN (+) | IN PLUG ON BOTTOM OF FUSEBOX | |
POWER LOCK | WHITE (-) | IN DRIVERS KICK PANEL | |
POWER UNLOCK | RED (-) | IN DRIVERS KICK PANEL | |
LOCK MOTOR WIRE | N/A | N/A | |
DOOR TRIGGER | ORANGE (-) | AT COURTESY LIGHT UNDER DASH | |
DOMELIGHT SUPERVISION | USE DOOR TRIGGER | | |
TRUNK RELEASE | N/A | N/A | |
SLIDING POWER DOOR | N/A | N/A | |
HORN | ORANGE (-) | AT STEERING COLUMN HARNESS | |
TACH | N/A | N/A | |
WAIT TO START LIGHT | N/A | N/A | |
BRAKE | ORANGE (+) | AT SWITCH ABOVE BRAKE PEDAL | |
FACTORY ALARM DISARM | N/A | N/A | |
ANTI-THEFT | TRANSPONDER ANTI-THEFT | TRANSPONDER @ IGNITION SWITCH TUMBLER |
ks audio
Member -
Posts: 25
Joined: December 09, 2008
Location: Utah, United States
Posted: December 09, 2008 at 10:27 PM / IP Logged
thanks what about factory disarm alarm there is not a bypass box the one you put the key in the box to self start it. is it need in this truck I dont think so but not sure none of my books show it. what do you thing
ksaudio
ckeeler
Gold -
Posts: 1,461
Joined: June 20, 2008
Location: New Mexico, United States
Posted: December 10, 2008 at 7:30 AM / IP Logged
some of thes models dont need it. it you can start the truck with just a regular metal key from the hardware store, you wont need one.
Mike M2
Platinum -
Posts: 2,652
Joined: June 29, 2005
Location: United States
Posted: December 10, 2008 at 6:50 PM / IP Logged
All crew cab Tundra's need a bypass. All double cab Tundra's need one except the 4x2 V6 model...
Mike M2
Tech Manager
CS Dealer Services
ks audio
Member -
Posts: 25
Joined: December 09, 2008
Location: Utah, United States
Posted: December 10, 2008 at 7:23 PM / IP Logged
ok so I so do need a bypass box. cool thanks
ksaudio
Follow the12volt.com
Wednesday, May 14, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.