the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

car alarm install.


Post ReplyPost New Topic
< Prev Topic Next Topic >
jayrebb 
Member - Posts: 6
Member spacespace
Joined: March 24, 2003
Posted: March 25, 2003 at 1:20 AM / IP Logged  

I am installing an eagle eye 90-902c, I have a few minor questions about a few things and any help would be greatly appreciated. 

First off my car uses a negative pulse to lock and unlock doors, one wire for lock one wire for unlock, my question is do i need to run these wires through a relay to my alarm brain or can i hook the wires (that give a negative pulse from the brain) directly to the lock/unlock wires.   I wasint sure if i neede the relays, its got factory keyless (not the remote kind)

I would also appreciate any other comments or hints, i got most of this figured out just wondering about the keyless entry mostly. but if anyof you know anything about:

-good brain locations
-best way to tap into wires in a harness
-Oh...one more thing i really need to know, whats the difference between "door trigger neg" and door trigger pos." on the brain? is it just whichever my car uses or should i be using both

 thanks, Kenneth

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 25, 2003 at 7:45 AM / IP Logged  
what is the make and model of the car
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
jayrebb 
Member - Posts: 6
Member spacespace
Joined: March 24, 2003
Posted: March 25, 2003 at 8:01 AM / IP Logged  
85 nissan maxima
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 25, 2003 at 8:29 AM / IP Logged  
Constant 12 volts WHITE/ BLACK IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ WHITE IGNITION SWITCH HARNESS
Starter BLACK / YELLOW IGNITION SWITCH HARNESS
Dome Light ORANGE / BLUE (-) AT COURTESY LIGHT OR AT RELAY
Trunk Pin Switch RED / WHITE (-) AT TRUNK SWITCH
Parking Lamp RED / WHITE (+) AT LIGHT SWITCH
Power Lock ADD ACTUATOR ACTUATOR NEEDED IN DRIVER DOOR #204
Power Unlock ADD ACTUATOR ACTUATOR NEEDED IN DRIVER DOOR #204
my notes say to add a motor to th edrivers door.
when you use a key to lock the drivers door, do all the locks operate?? if so then you need to add a motor to the drivers door.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
jayrebb 
Member - Posts: 6
Member spacespace
Joined: March 24, 2003
Posted: March 25, 2003 at 8:45 AM / IP Logged  
thank you for your help but i already have those wires  figured out, and my car had factory keyless, i got all factory actuators working.. but thanks for you help bro, Kenneth
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: March 25, 2003 at 8:47 AM / IP Logged  
did you get the door locks working?/
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer