2004 toyota tundra double cab

Home / the12volt's Install Bay / Car Security and Convenience / 2004 toyota tundra double cab (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mobile12volts

Member - Posts: 1

Joined: December 31, 2009

Posted: December 31, 2009 at 7:47 AM / IP Logged

Hi,

am having problem with a 04 toyota tundra. I have install a keyless entry in it. It appears that when the truck sits for a while and you go to unlock it wont. After you manually open the door the keyless entry begins to unlock and lock and will stay working after. Only after it sits for a while it doesnt. work I installed the keyless entry in the kick panel and the the lock and unlock wires directly solder into the factory driver switch. Can anyone help. Everything else is working fine.....

mobile12volts

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: December 31, 2009 at 2:31 PM / IP Logged

http://documents.audiovox.com/710624.pdf

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 toyota tundra double cab

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.