magicar 902

Home / the12volt's Install Bay / Car Security and Convenience / magicar 902 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

palcal1

Member - Posts: 3

Joined: February 16, 2010

Location: North Dakota, United States

Posted: March 05, 2010 at 6:33 PM / IP Logged

Has anyone every put one of these in. I put it in and the door locks and all work but can not get the truck to start. When started with the key it would not turn off. Had to pull the fuse out of the magicar to get it to turn off. any idea on what i did wrong. Do you need to have the starter relay put in this.

Calvin

palcal1

Member - Posts: 3

Joined: February 16, 2010

Location: North Dakota, United States

Posted: March 05, 2010 at 6:38 PM / IP Logged

I put a magicar 902 in a 2008 F-150 pickup. The door locks work and the horn chrips. It will not start. When started with the key I could not turn the truck off. I had to pull the fuse out of the magicar to get it to turn off. I did not put the relay in the started. There was a yellow wire all ready to the started and could not see why I would need it. All I want is the truck to start and lock and unlock the doors. has any one put one of these units in before. Sure would like a little help on this thanks

Calvin

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 05, 2010 at 7:52 PM / IP Logged

you should check your wiring at the ignition. after you remove the key,

open the door and close it. see if it turns off. if this is the case its set for manual tranny.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

magicar 902

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.