code alarm ca 670, 2005 chevy silverado

Home / the12volt's Install Bay / Car Security and Convenience / code alarm ca 670, 2005 chevy silverado (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

servtex

Member - Posts: 2

Joined: May 02, 2007

Location: United States

Posted: July 10, 2010 at 10:50 PM / IP Logged

I am in the middle of installing a code alarm ca 670 into my 2005 chevy silverado no power locks i am installing the code alarm remote start and alarm

I have a few questions

Blue/Black (-) active output?

BLUE/WHITE - INSTANT TRIGGER INPUT (-)?

WHAT DO THOSE MEAN

thanks for any replies

i am an idiot

Platinum - Posts: 13,715

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 10, 2010 at 11:21 PM / IP Logged

I am guessing that the wire labeled - active output is the ground when armed wire. That means that it has ground on that wire when the alarm is armed. It is usually used to control the LED of the alarm, as well as the starter kill relay.

The Blue/White wire that is labeled instant trigger input is the wire that you would connect the output wire of a sensor to. If this wire sees ground when the alarm is armed, it will trigger the alarm.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 11, 2010 at 2:30 AM / IP Logged

Does your unit not have an instruction manual? If so read it.

It should explain what every wire does and its function.

lectricguy

Copper - Posts: 359

Joined: March 18, 2008

Location: Rhode Island, United States

Posted: July 11, 2010 at 10:48 AM / IP Logged

Blue/Black is Ground output while the remote start is running...From the manual:

Active Output (-) 500mA (BLUE/BLACK)

The Active Output/Ignition 3 output wire provides a ground output when the remote start function is activated

and remains until 4 seconds after the remote start is shutdown.

Mr. I is correct on the Blue/White:

Instant Trigger Input (-) (BLUE/WHITE)

This wire is a GROUND input for an external sensor or secondary pin switch.

Verification: This wire when connected will trigger the security system.

If you have the Install guide, each wire's function is explained in detail.

Lectric Guy

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

code alarm ca 670, 2005 chevy silverado

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.