pls help( pwr door locks actuators )

Home / the12volt's Install Bay / Car Security and Convenience / pls help( pwr door locks actuators ) (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tegra02

Member - Posts: 2

Joined: April 12, 2003

Location: United States

Posted: April 17, 2003 at 5:45 PM / IP Logged

sup gang.

its my first time installing my alarm on 90 integra...( carbine 3000 plus )...3 questions for you guys...

1: according to the diagram ( GREEN/ red ) is the door lock trigger, but when i check it on the fuse box i have about four of it...which one is the right one to connect to the alarm? and can i use the dome trigger ( blue/green ) instead of the door trigger.

2: as you know i dont have power door locks on my car but i bought 2 actuators to put in. can i use the reverse polarity wiring on it and on my alarm i have 3 wires coming out of the alarm ( power dor locks ) black, red and orange.....now which one is to go to the negative unlock and negative lock.......pls help on this i got stuck here....

3: can i tap the hood trigger to my car trunk trigger. you know what i mean.......

pls help on this, really appriciate it.....thank you..

anthony

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 17, 2003 at 7:36 PM / IP Logged

dome light is the same as door trigger....

grenn/red at the pass. pin switch.

here some wiring info:

Constant 12 volts WHITE/ BLACK IGNITION SWITCH HARNESS

Ignition 12 volts BLACK / YELLOW IGNITION SWITCH HARNESS

Starter BLACK/ WHITE IGNITION SWITCH HARNESS

Dome Light GREEN/ RED (-) PASSENGER PIN SWITCH

Trunk Pin Switch GREEN/ BLACK (-) DRIVER KICK PANEL

Parking Lamp RED / GREEN (+) AT HEADLIGHT SWITCH

Power Lock GREEN / WHITE DRIVER KICK # 201

Power Unlock GREEN/ RED PANEL

#201- See Negative Pulse Door Lock Diagram.

check all of your wires with a meter first!

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

tegra02

Member - Posts: 2

Joined: April 12, 2003

Location: United States

Posted: April 17, 2003 at 8:58 PM / IP Logged

negative pulse door lock diagram? so i cannot use the reverse polarity, pls help....how to wire the whole process of door locks with........2 wire from the actuators.......and three 3 wire from my alarm........thank you guys.....

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pls help( pwr door locks actuators )

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.