the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start, 2008 mountaineer


Post ReplyPost New Topic
< Prev Topic Next Topic >
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 19, 2011 at 10:08 PM / IP Logged  
i am installing a remote start in 2008 mercury mountaineer premier v8 i have 556uw bypass but only 1 key any bypass that i can use with 1 key
wiener20
tonanzith 
Gold - Posts: 603
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: January 20, 2011 at 12:19 AM / IP Logged  
None.
You either need to have a new key cut and programmed, (recommended)
OR,
wire the 556uw to a constant ground, ground the status wire, and put the constant 12v to ignition, have a new plain non coded steel key cut at home depot and put the coded key in the 556. (NOT recommended)
This will make the vehicle think that your using the original key any time you start it with the plain non coded steel key and also serve as they bypass for the remote start. AGAIN, NOT recommended, but will save 60-100 bucks for the second key.
Gary Sather
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 20, 2011 at 5:46 AM / IP Logged  
interesting where would the remote start status output wire go
wiener20
tonanzith 
Gold - Posts: 603
Gold spaceThis member consistently provides reliable informationspace
Joined: July 18, 2008
Location: Washington, United States
Posted: January 20, 2011 at 11:51 AM / IP Logged  
Well, if you do the NON recommended way. It would not need to be used.
Gary Sather
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 21, 2011 at 7:17 PM / IP Logged  
thanks for the knowledge i'm springing for new key
wiener20
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 21, 2011 at 8:38 PM / IP Logged  
i have wire connection info for remote start 2008 mercury mountaineer but does not show tach wire info
wiener20
jpadj22 
Copper - Posts: 100
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: March 19, 2010
Location: Illinois, United States
Posted: January 21, 2011 at 8:53 PM / IP Logged  
Bulldog wiring says
Tach @ any fuEl injector not purple
An injector has 2 wires, usually one wire on every injector is the same color. So in this car look for the wire thats not purple. Very the wire with DMM, should show voltage between 1-6v.
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 21, 2011 at 9:47 PM / IP Logged  
thank you goes in tomorrow i plan on using 2 wire crimp connectors for project hopefully should do
wiener20
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 22, 2011 at 8:47 AM / IP Logged  
First set the DMM to 20volts AC.
Second any of the uncommon colour injector wires will do.
Third, don't crimp, solder your connections.
bwiener 
Member - Posts: 15
Member spacespace
Joined: January 19, 2011
Location: Illinois, United States
Posted: January 22, 2011 at 9:09 AM / IP Logged  
thank you
wiener20
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer