2011 nissan versa 1.6

Hello I have just purchased a 2011 Nissan Versa 1.6. From my research it appears all the versa have the door actuators built in front the factory,so I have purchased a Viper 211HV keyless entry to install.Got all the basic functions besides the horn working correctly,but all the simple online instructions for the OEM door actuators seem to all be different. My drivers side door has a 6 Pin connector on the actuator,I will attach a pic here From what I understand the 211hv has built in relays so I should be all set besides adding a relay in for the progressive unlock.....just cant figure out why I can get the drivers door to fire by itself first...any help appreciated

anybody thoughts/ideas?

Grey lock, grey to purple unlock, NEG. pulse driver kick panel.

Easy as pie.commit your way to jehovah and he will act in your behalf. psalms 37:5

I have no wiring for my door locks,my car is the stripped base 1.6. The relays are part of the door lock so they are installed.

Er, let's get this right... Factory relays and actuators but no wiring? Look again.

Get the looms from a dealer, that would be your first port of call.

howie,look at the picture. the actuator is part of the door lock assembly so nissan is not going to redesign that for one model lineup,they just ditched the harnesses. I guess the only thing I can do is go to a junk yard and get the wiring harness to plug into the connection

source of info http://forums.nicoclub.com/adding-door-lock-actuators-to-base-model-t441153.html

Oh i now catch on to what you were saying, sorry my bad, i'm kinda slow that way, well there are two ways you could possibly do this, i'll give you one, take your dmm out and set to continuity, between two of those pins and one common pin you should have continuity when the lock is locked and the other when unlocked, when you eliminate this there chould be three pins remaining, take a power fused at five amps and a ground and alternate it between the remaining terminals and you should be able to find the ones that make the actuator move, this is only if you can't get the original wiring harnesses.commit your way to jehovah and he will act in your behalf. psalms 37:5