2011 Hyundai Sonata, Python 1401 Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2011 Hyundai Sonata, Python 1401 Remote Start

Welcome Guest :)

Members

< Prev Topic Next Topic >

indie87

Member - Posts: 5

Joined: October 29, 2011

Location: Washington, United States

Posted: November 02, 2011 at 7:07 PM / IP Logged

I installed dball and python 1401 kits on 2011 sonata with smartkey and push to start(d2d

Eveything is fine without remote start. I can open the doors and trunk using the python key.

That's my manual for remote start

Do I have to connect other wires ??

I just connected black wires.

Do I need to connect wires from push to start??

2011 Hyundai Sonata, Python 1401 Remote Start -- posted image.

minjunkim

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.