the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

5704 controlling other things


Post ReplyPost New Topic
< Prev Topic Next Topic >
joe schmoe 
Member - Posts: 4
Member spacespace
Joined: November 28, 2011
Posted: November 28, 2011 at 8:29 AM / IP Logged  

I just had a Viper 5704 installed in my 2008 Toyota Tundra. I am looking for some way to make the 5704 control via one of the extra auxillary outputs or maybe even a 530T module to activate the FRONT window defogger. Also I would like to control my side view mirror defogger/icer.

Has anybody tried this? It doesn't seem to be that complicated or difficult to do. It would just require the right wire and knowing how to trigger the affect (mirrors or window defogger).

Am I think ing to far outside the box for a VIper system?

Any ideas would be appreicated.

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 28, 2011 at 12:39 PM / IP Logged  
The 530t is a window closer, don't you mean a 528t timer module?
You need to know the defogger circuitry for rear screen and mirrors before you go ahead.
joe schmoe 
Member - Posts: 4
Member spacespace
Joined: November 28, 2011
Posted: November 28, 2011 at 12:45 PM / IP Logged  

I was using the 530T module as an example....

Also, I am looking at using the FRONT window defogger , not the rear...I will find out the front window defogger circuit and the side mirror defroster circuit IF Viper 5704 actually will work for this little project....

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 28, 2011 at 12:46 PM / IP Logged  
I checked up no parts needed:-
Rear defog Green latched* -, driver kick panel,grey 20 pin plug, pin 3.
Mirrors, Blue latched* -, rear of dashboard fuse box, white 66 pin plug, (marked DD) pin 19.
*Latched means you ground it momentarily to activate after R/S has started the engine, ground again to disable it/them.
joe schmoe 
Member - Posts: 4
Member spacespace
Joined: November 28, 2011
Posted: November 28, 2011 at 12:48 PM / IP Logged  

howie ll wrote:
I checked up no parts needed:-
Rear defog Green latched* -, driver kick panel,grey 20 pin plug, pin 3.
Mirrors, Blue latched* -, rear of dashboard fuse box, white 66 pin plug, (marked DD) pin 19.
*Latched means you ground it momentarily to activate after R/S has started the engine, ground again to disable it/them.

WOW That was fast...>Thank you!!!!

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 28, 2011 at 12:48 PM / IP Logged  
We crossed posts, can't help you with the front, sorry. And the 530t isn't a good example, I wouldn't even need it for mirror fold.
joe schmoe 
Member - Posts: 4
Member spacespace
Joined: November 28, 2011
Posted: November 28, 2011 at 12:50 PM / IP Logged  

So for the side mirror defrost/defog the 5704 already has provisions for this?

quote"Mirrors, Blue latched* -, rear of dashboard fuse box, white 66 pin plug, (marked DD) pin 19. "

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: November 28, 2011 at 4:56 PM / IP Logged  
I have no info on front but for the mirrors and rear just use one* or 2 aux outputs set as momentary or linked if possible to remote start.
* If you use one, diode separate them.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer