foxguard alarm f14e

does anybody have any information on this alarm?

Yes bin it! They were current around 1998 and faded soon afterwards, doubt anyone has any info on them now.

obsolete product. pick up something more recent, or buy an older bulletproof clifford, as howie II would suggest. If they still existed of courseTed

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

They were only really sold as early Thatcham Cat I alarms, were over complicated and unreliable. At that point (95-00) Clifford, Cobra and Laserline swept them off the market. Old Cliffords back to 93 still work well because of the original superior build and component quality, we just can't get the remotes.

Ted, this is another DIFM post, it took me 2 minutes of Googling to find this:- sales@bridgewater-electronics.co.uk Phone (44) 1278 789 782

sorry for the delay, havn't gone at it for a week, thanks for your replies. i am just trying to diagnose a problem with my run around car, it wont start. just wondering how this alarm actually works, what it does and how easy is it to remove. (my car will turn over but not start) i have emailed bridgewater, and they told me to ring them but i cannot hear anybody on the other end of the line when they answer.

is it just a case of taking the wires out of theback, or is it more complicated than that?

I can't help you without you following the rules and telling me what car. Remove the Foxguard and reconnect the ignition or fuel pump wire.

sorry, its a 96 nissan almera.

Drop the steering column cover the alarm then joins with the ignition switch loom, lower right under the column, cut all the alarm leads away then bin the alarm, you will have 2 cuts in that loom, join the relevant wires together.