’05 audi a6, remote start

Home / the12volt's Install Bay / Car Security and Convenience / ’05 audi a6, remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rufgt

Member - Posts: 1

Joined: May 21, 2012

Posted: June 01, 2012 at 3:20 PM / IP Logged

i'm trying to find out what modifications need to be done to the key cylinder so i can put in a remote start. i have a key, a box to put it in & a module to cover the rest. i'm just having the hardest time trying to find this info. hope someone can help me out. i'm new to posting on this forum. thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: June 02, 2012 at 5:28 AM / IP Logged

Assuming a regular ignition key, there should be 2 wires coming from the black plastic antenna coil that sits around the ignition switch. Possibly light green and light GREEN/ black, if the box is a DEI 556UW, follow the Euro specific instructions, disposing of the loop.

Use a black valet key obtained from your Audi dealer.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

’05 audi a6, remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.