the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

95 accord clutch bypass wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
desh187 
Copper - Posts: 310
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 13, 2002
Location: Canada
Posted: June 07, 2012 at 11:44 AM / IP Logged  
Installed a compustar in a 95 Accord Standard but couldnt get the reservation mode to work due to clutch wire.DEI info says its BLACK/ green(+) at clutch switch and to connect the starter wire at this location.Remote start only works if i press the clutch in.
Any info will be much appreciated.
Thanks
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 07, 2012 at 6:43 PM / IP Logged  

Is there another wire on the clutch switch?  If so, try that one instead.

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 09, 2012 at 10:25 AM / IP Logged  
There was also a cruise control release switch if the vehicle had it fitted. Please don't confuse them.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: June 09, 2012 at 10:29 AM / IP Logged  
I think Mr. I. and myself might be confusing you.
Did you find that wire?
If so test, meter to 20volt DC, black probe to ground, red probe to wire, what happens when you press the clutch and start the car?
i am an idiot 
Platinum - Posts: 13,693
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: June 09, 2012 at 2:21 PM / IP Logged  
Good point Howie, if there is cruise control on the vehicle, the clutch mechanism will be fitted with 2 separate switches. One switch will activate with just a touch of the pedal, the other will require the pedal be fully depressed before the switch will activate. The one that activates with just a touch is the one that kills the cruise. The one that activates when fully depressed is the one that keeps the car from starting unless clutch is depressed.
The switches may be both contained in a single housing, there may be 3 or 4 wires going to the switch.
desh187 
Copper - Posts: 310
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 13, 2002
Location: Canada
Posted: June 10, 2012 at 11:31 PM / IP Logged  
There are 2 switches,one the plunger comes outwhen the pedal is pressed And the other pushes in and on this one,when the pedal is pressed and started,the GREEN/ black wire has 12 volts.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer