06 altima ignition harness problem

Home / the12volt's Install Bay / Car Security and Convenience / 06 altima ignition harness problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kg98921byrams

Member - Posts: 3

Joined: August 26, 2012

Location: New Jersey, United States

Posted: August 26, 2012 at 10:23 PM / IP Logged

the wiring diagram at this site and bulldogsecurity says that 06 altima has 2 accessory wires, which is red and WHITE/ blue. when i test it with the dmm, i'm getting 2 ignition wires, which is the main wire is BLACK/ red and the second is red wire. i'm loosing 12v on those two wires when it's on accessory position. anyone here have install an alarm on this car and let me know if i'm right or wrong. thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 27, 2012 at 2:18 AM / IP Logged

If an alarm it doesn't matter.

If a remote start unless they help in the starting cycle leave out, then eliminate, which does heater controls you will need?

Wipers window lifts, audio, you won't need.

BLACK/ red is the important one.

kg98921byrams

Member - Posts: 3

Joined: August 26, 2012

Location: New Jersey, United States

Posted: August 27, 2012 at 6:50 AM / IP Logged

it's both alarm and remote start. i got the compustar.

the heater control is what i don't understand. what does it mean by having 2 heater control? i thought there is only one.

i understand blk/red is ignition and the WHITE/ blue is the acc wire. what worry me is the red wire. my gut instinct says to use it as 2nd ignitition, since i'm not getting voltage reading on acc position. but both sites is showing that i'm wrong. i'm sure they done it before before posting it on the site.

anyway i won't be able to know until later on this week. i had to order the cable so i can hook up the module to pc to flash it

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: August 27, 2012 at 7:17 AM / IP Logged

I agree, use WHITE/ blue as ACC, red as 2nd. ignition, you will do no harm.

Event cycle:-

Ignition.

Start.

ACC.

P.S. relay required for 2nd. starter wire:- 2nd._starter..bmp

kg98921byrams

Member - Posts: 3

Joined: August 26, 2012

Location: New Jersey, United States

Posted: August 27, 2012 at 7:25 AM / IP Logged

yeah i actually need 2 relay for the 2nd starter and ignition. thanks for all your help. i'll let you know how it works out

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

06 altima ignition harness problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.