mazda 626 ditd,keyless unit

Home / the12volt's Install Bay / Car Security and Convenience / mazda 626 ditd,keyless unit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

damalesic

Member - Posts: 2

Joined: May 21, 2013

Location: Croatia

Posted: May 21, 2013 at 2:37 PM / IP Logged

i'm trying to connect aftermarket keyless unit and i found one wire that lock and unlock.i was connect lock and unlock wires from keyless unit to this one wire and i put 1kohm resistor to unlock wire.remote is working but not properly.with one click on remote it locks and unlocks in second than after few clicks it finaly locks.same with unlocking.sometimes locks with unlock button sometimes is opossite way.i don't know what system this mazda have and how to connect.Mazda 626,year 2000.thanks in advance.

damalesic

Member - Posts: 2

Joined: May 21, 2013

Location: Croatia

Posted: May 21, 2013 at 11:21 PM / IP Logged

mazda 626 ditd,keyless unit -- posted image.

this is schematic for keyless unit

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mazda 626 ditd,keyless unit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.