the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Parking Lights Flash


Post ReplyPost New Topic
< Prev Topic Next Topic >
sazaks 
Member - Posts: 12
Member spacespace
Joined: April 02, 2002
Location: Canada
Posted: May 20, 2003 at 7:28 AM / IP Logged  
I'm almost done installing my Alpine SEC-100S alarm in my 2001 Honda Prelude. The only thing left to do is connect the 12+ lead from the alarm to the parking lights. Problem is....I don't know where to plug the thing in.... Help,,,
cpgoose 
Gold - Posts: 1,098
Gold spacespace
Joined: July 08, 2002
Location: United States
Posted: May 20, 2003 at 9:37 AM / IP Logged  
The diagram I found shows the parking lights to be
a RED / black wire (+) found at the lightswitch wire harness.
Here's the site
I didn't check your manual, though, so you just might want to make sure whether or not you'll need a relay for the parking lights or not.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer