remote start recommendation? 2005 f250

Home / the12volt's Install Bay / Car Security and Convenience / remote start recommendation? 2005 f250 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

zimm17

Member - Posts: 8

Joined: November 06, 2014

Location: Virginia, United States

Posted: November 06, 2014 at 10:56 AM / IP Logged

I want a simple 2-way remote start system for my 2005 F250 (gas) truck. It currently has remote locks and no alarm. No immobilizer so it should be a simple install.

The more I read on the internet, the more confused I get. Most of my research pointed me towards the compustar stuff and away from Viper as they have "gone downhill". I was ready to jump on the Slice Jr. remote with associated FT-6200S-CONT brain, but shopping on the internet shows that the box is discontinued? Ideas?

smokeman1

Platinum - Posts: 1,589

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: November 06, 2014 at 12:34 PM / IP Logged

I used Viper stuff in 6 of my own vehicles with out any issues. Mostly the Viper 5301 stuff. Currently have a Viper 4706 in my 2004 F150. No issues. A Viper 5301 in the wife's 09 Corolla for 6 years now.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

kreg357

Platinum - Posts: 7,827

This member has been recognized as an authority in Electrical Theory. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 06, 2014 at 12:40 PM / IP Logged

While the FT-6200-s has been replaced by the newer FT-7200-s, it is still a nice unit and the prices are reasonable. It has all the features you need.

Agree with Mr. Smoke. IMHO, a lot of the bad press on the Viper products comes from non- DEI trained people that have problems due to the un-availabliity of complete install guides, tech support, etc.

Soldering is fun!

zimm17

Member - Posts: 8

Joined: November 06, 2014

Location: Virginia, United States

Posted: November 06, 2014 at 2:07 PM / IP Logged

Thanks, I'll read up on the 7200 as well. I already see that it's smaller, that'll help. I pulled down the wiring diagram from the bullydog website, that has most of my questions answered. I'm not DEI trained either, but I put remote start in an '03 F250 diesel years ago and probably a dozen audio systems, so I can get it done.

kreg357

Platinum - Posts: 7,827

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 06, 2014 at 5:02 PM / IP Logged

Here is a link to a remote start Pictorial on a 2002 F250 which should be of assistance :

https://www.the12volt.com/installbay/forum_posts.asp?tid=133810

Remember that with Compustar systems, they usually are sold in two separate units. The controller kit and the remotes /

antenna kit. Make sure that the remote kit is compatible with the controller kit.

Soldering is fun!

zimm17

Member - Posts: 8

Joined: November 06, 2014

Location: Virginia, United States

Posted: November 06, 2014 at 5:26 PM / IP Logged

Thanks for the link. I ordered the newer box and the slice jr remote. Can't wait to get it installed. Any idea if I want the high or low power ignition? New box has both...

kreg357

Platinum - Posts: 7,827

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 06, 2014 at 5:30 PM / IP Logged

All high power on that truck. Good luck with the install! remote start recommendation? 2005 f250 -- posted image.

Soldering is fun!

zimm17

Member - Posts: 8

Joined: November 06, 2014

Location: Virginia, United States

Posted: November 06, 2014 at 5:42 PM / IP Logged

kreg357 wrote:

All high power on that truck. Good luck with the install! <IMG src="https://www.the12volt.com/installbay/smileys/smiley14.gif">

Thanks. I'll be back with questions. First off, what awesome circuit tester is that in the link? Can't find it via Google.....

kreg357

Platinum - Posts: 7,827

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: November 06, 2014 at 6:12 PM / IP Logged

Called a Circuit Buddy. Pretty handy tester. Goes for about $25. Here is a link : http://www.circuitbuddy.net/products.htm

Here is a link to a Pictorial where it is mentioned : https://www.the12volt.com/installbay/forum_posts.asp?tid=133496

Here is another link to a probe discussion : https://www.the12volt.com/installbay/forum_posts.asp?tid=130059&tpn=2

Soldering is fun!

zimm17

Member - Posts: 8

Joined: November 06, 2014

Location: Virginia, United States

Posted: November 15, 2014 at 12:49 PM / IP Logged

I'm about to install today. Reading the instructions I have questions...

The f250 has IGN 1 and 2, as well as accessory 1 and 2. I don't have have enough outputs on the compustar to power them all. I could use the parking light output and program it for second accessory? But then my lights won't flash. Or can I somehow combine two together?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.