the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Code alarm/FLCAN manual transmiss


Post ReplyPost New Topic
< Prev Topic Next Topic >
tj 2 jku 
Member - Posts: 1
Member spacespace
Joined: November 02, 2015
Location: Virginia, United States
Posted: November 03, 2015 at 7:27 AM / IP Logged Link to Post Post Reply Quote tj 2 jku
I purchased a remote start/security, proxy sensor, and bypass online with the intention to install myself but after looking at it, it's just so intimidating. I've always been more than proficient with A/V so I thought I'd give it a shot. I'm at the point where I'm gaining some knowledge reading forums and watching videos but the more comfortable I get, the more I feel like I'm lost if that makes sense. Please help me. I'll start with a few questions.
I've downloaded the install guide located here: Here
I see that I can use either install type 3 or 8 (3 being hard wire and 8 using T harness). I called Flashlogic to find out if I need to buy their tipstart harness or non. I was told that I can't use the t harness because it's a manual. Is this true? I was hoping to eliminate as much splicing and searching by using the harness and hardwire the remainder.
Assuming I can use the harness, is it as easy as plugging the cables into the flcan, plug it into the data port of the brain, and connect the t portion to the ingnition harness? Followed by few hard wires remaining?
I'm sorry this is so long, I just wanted to be as clear as possible. Any help would be great, thanks.
rs specialist 
Copper - Posts: 175
Copper spacespace
Joined: September 30, 2015
Location: Arizona, United States
Posted: November 16, 2015 at 11:26 AM / IP Logged Link to Post Post Reply Quote rs specialist
I don't know that they make that t-harness any longer, so that may be why they say that. Also the new version for that vehicle's T-harness does not work on manual transmissions.
If you can find that t-harness, you could use it. You will need to hard wire some parts. Also it may help if you list the type of vehicle, my guess is a jeep or ram.
It is a simple install if you follow the directions as they have them laid out.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer