2016 Subaru Forester Remote Start Check TPMS

Home / the12volt's Install Bay / Car Security and Convenience / 2016 Subaru Forester Remote Start Check TPMS

Welcome Guest :)

Members

< Prev Topic Next Topic >

steven17s

Member - Posts: 6

Joined: October 07, 2009

Location: Wisconsin, United States

Posted: December 08, 2015 at 3:11 PM / IP Logged

Just installed a viper 5706 alarm remote start keyless entry system with the idatalink bypass module. The installation was completed successfully with the exception of an error message on the car screen that reads "TPMS system needs to be checked". Has anyone experienced this after an install? Based on the owners manual it's not a tire low (I did confirm that after checking with a tire gauge). Any idea how to reset the system or will this require a visit to a dealership? Any help is appreciated.

steven17s

Member - Posts: 6

Joined: October 07, 2009

Location: Wisconsin, United States

Posted: December 16, 2015 at 12:09 PM / IP Logged

Anyone else run into something like this?

steven17s

Member - Posts: 6

Joined: October 07, 2009

Location: Wisconsin, United States

Posted: December 23, 2018 at 4:11 PM / IP Logged

I ended up removing the remote start system and the TPMS light went off. I’m suspecting it was the I datalink module creating interference.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.