the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar remote Start Blue LED


Post ReplyPost New Topic
< Prev Topic Next Topic >
ouellr 
Member - Posts: 1
Member spacespace
Joined: February 06, 2006
Location: Canada
Posted: January 27, 2016 at 5:29 PM / IP Logged Link to Post Post Reply Quote ouellr
Can someone tell me if the standard blue Compustar LED and wiring plug needs a resistor, or can I simply wire a new LED, wire and plug directly to the 7200 brain ?
My original installation did not include a visible status LED, and it is sorely missed.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer